License for a bending neutral pressure distribution plate for the measurement of middle to very large forces

OFFER from Germany, reference: TODE20190328004, valid from 28-03-2019 untill 01-04-2020

Technology
  • Title:
    License for a bending neutral pressure distribution plate for the measurement of middle to very large forces
  • Start date:
    28 maart 2019
  • End date:
    1 april 2020
  • Summary:
    A German research institute has developed a bending neutral pressure distribution plate for the reduction of measuring uncertainties during the measurement of middle (10 kN) to very large forces (higher than 10 MN). Currently such measurements require the connection of several calibrated force transducers together to form a build-up measuring system. Due to the special geometry of the system complex compensation mechanisms become unnecessary. The institute is looking for licensees.
  • Description:
    A research institute based in Germany active in metrology has developed a bending neutral pressure distribution plate which leads to higher certainty during the measurement of middle (10 kN) to very large forces (higher than 10 MN). Due to increasing requirements, especially in the realisation of large force transducers up to 50 MN, the reduction of the measurement uncertainty of these systems will become more and more important in the future. Currently such measurements require the connection of several calibrated force transducers together to form a build-up measuring system. Due to the special geometry of the system, complex compensation mechanisms become unnecessary.
    Currently commercially available build-up systems have a pressure plate, which loads the pressure as evenly as possible to all force transducers. Under load the pressure plates are deflected, so that a parasitic force occurs in the transverse direction of the force transducer.
    The new development takes advantage of the unavoidable elastic deformation. Due to a special shape of the cross section, the bending angle at the load introduction into the force transducers is almost zero. This transmits a vertical force independent of the load, at which no transverse force is introduced into the transducer. The geometry parameters of the pressure distribution plate must be determined by numerical simulation. A prototype with a nominal load of 30 kN has already been realized. For simplified production, the pressure distribution plate can consist of several parts which are screwed together to form a complete pressure distribution system.
    Economic importance: The load introduction parts of very large build-up systems are very stiff, which requires a large amount of material. By exploiting the elastic properties of this construction, a great material amounts can be saved.
    The institute is looking for licensees.
Partner Sought
  • Type of Partnership Considered:
    License agreement
  • Technical Specification or Expertise Sought:

    Targeted partners are active in the development and production of equipment for force measurements.
    The institute is looking for parters interested in the commercial use of the system as licensee.

Organisation
  • Development stage:
    Prototype available for demonstration
  • IPR Status:
    Patent(s) applied for but not yet granted
  • Market keywords:
    Industrial measurement and sensing equipment
    Engineering services
  • Technology keywords:
    Mechanical Technology related to measurements
  • NACE keywords:
    Manufacture of instruments and appliances for measuring, testing and navigation
    Other research and experimental development on natural sciences and engineering
  • Advantages and Innovations:
    The offered system offers several advantages:
    - No parasitic loads
    - Material savings
    - No additional pressure pieces
Client
  • Type and Size of Organisation:
    R&D Institution
  • Already Engaged in Trans-National Cooperation
    Ja
  • Year Established:
    0
  • Turnover:
  • Country of origin:
    Germany
  • Languages spoken
    • English
    • German
Afbeeldingen
Images